BUSY=Val_0, FIFO_CLK_SEL=Val_0, SW_RESET=Val_0, START=Val_0
Camera Control Register
| START | Start video capture. 0 (Val_0): No action 1 (Val_1): Start video capture |
| BUSY | Status of video capture. 0 (Val_0): Not capturing video 1 (Val_1): Capturing video |
| SNAPSHOT | Snapshot mode selection. 1 (Val_1): Capture one frame then stop (snapshot mode) |
| SW_RESET | Software reset. Software shall set then clear this bit. 0 (Val_0): Not reset 1 (Val_1): Reset |
| FIFO_CLK_SEL | Select clock source for the camera data input FIFO. 0 (Val_0): Select internal clock for soft reset 1 (Val_1): Select external camera clock for normal function mode |